home snow plows wings hitches hydraulics dump bodies spreaders contact
   

“RH” Series
The model “RH” reversing table is used on Gledhill’s heavy-duty, manual reversible series of snow plows. Constructed to provide plowing angles of 35° right and left a as well as a 0° bulldozing position. Reversing or plow angle change is accomplished by pulling a pin, then manually rotating the plow to the desired angle and replacing the pin. The table has five hinge points for connection to the moldboard for maximum strength. Plates are provided for acceptance of our standard adjustable mushroom shoes or optional caster wheel assemblies. The A-Frame is especially designed to permit plow oscillation so the plow will follow the contour of the road. 30" ear spacing to the truck hitch by means of adjustable, heavy-duty, cast steel ears is standard.
 
“PCL” Series
The Gledhill Power Circle Latch series of snow plows utilizes our “PCL” reversing table assembly. The sturdy, automatic latching device secures the moldboard into one of eleven different plowing angles from 35° right to 35° left. Reversing is accomplished by 2.5" diameter cylinders that require a limited hydraulic flow for unlatching and rotating the moldboard. Therefore, a compact, inexpensive, electric, hydraulic pump can be used with this series of plows. Five hinge points on 88" centers are provided for connection to the moldboard. Also, the table assembly has mounting plates for the attachment of our standard adjustable mushroom shoes. Our table design permits oscillation for the plow to follow the contour of the road. Heavy-duty, adjustable, cast steel ears on 30" spacing are provided for connection to the truck hitch.

“PR2” Series
The Gledhill “PR2” reversing table is used on our heavy-duty, power reversible series of snow plows. Our massive 4" double-acting, reversing cylinders with 2" piston rods provide the necessary power to reverse the plow from 35° right to 35° left or hold the plow at any angle within the arc without recourse to a locking device. This table has five hinge points on a total 88" center giving the plow maximum strength between the moldboard and table. Mounting plates are provided for the attachment of our standard adjustable mushroom shoes which do not need to be oriented into a travel direction because of their design. The heavy-duty A-Frame is attached in such a manner to the table so as to permit plow oscillation for the plow to follow the contour of the road. 30" ear spacing to the truck hitch is standard with adjustable, heavy-duty, cast steel ears.
 
“PR4” Series
The Gledhill “PR4” reversing table is a medium duty assembly built with high strength materials. The “PR4” series has been designed to fit on most trucks with a 10,000# front axle capacity. It is hydraulic reversible with two 3" x 10" double acting cylinders. 4" x 4" square tubing and 3" x 3" x 1⁄2" angle make up this table. Mounting plates are provided for attachment of our standard adjustable mushroom shoes or optional caster wheel assemblies. A pivot bar with 30" push ear spacing to the truck hitch is standard.

“PRT” Series
The Gledhill Model PRT reversing table is used on our heavy-duty, power reversing series of snowplows. The massive reversing assembly uses 5" structural tubing for unmatched strength. Standard features include seven moldboard hinge points with 1-1/4" hinge pins. Reversing is accomplished by two 4" x 12" double acting cylinders with 2" piston rods that will reverse 35° to the right and left or any angle in between. Mounting plates are provided for attachment of our standard adjustable mushroom shoes or optional caster wheel assemblies. The heavy duty A-Frame is constructed of structural tubing as well. Various types of “quick hitch” attachments are available. A pivot bar with 30 push ear spacing to the truck hitch is standard.

“1WT” Series
The Gledhill “1WT” one-way table assembly provides a fixed 35° plowing angle. This table is built to take on winter. It is fabricated of rugged 4"x 4" x 1⁄2" wall tubing and 6" x 4" x 1⁄2" tubing. Five hinge points connect the table to the moldboard with 1-1/4" diameter pins. Plates are furnished for acceptance of our heavy duty adjustable cast shoe assemblies or optional caster wheels. A pivot bar with 30" push ear spacing to the truck hitch is standard.

 

 

back to the top